Codiode

4-Bit PIPO: One-Cycle Register Latency

EasyLogic CircuitTiming Diagram

A positive-edge-triggered 4-bit Parallel-In Parallel-Out (PIPO) register captures the values of D3, D2, D1, and D0 at every LOW-to-HIGH transition of CLK and holds them until the next rising edge.

Nine signals are shown: CLK (clock, period 2), D3, D2, D1, D0 (inputs), and Q3, Q2, Q1, Q0 (outputs, initially 0, 1, 0, 1 respectively).

Trace Q3, Q2, Q1, and Q0 across all 8 time steps.

Constraints

  • The register is strictly positive-edge-triggered.
  • Input changes that occur exactly on the clock edge are not captured until the next rising edge due to setup time requirements.

Topics

sequential-logiclatencyshift-registerspipo

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Shift Registers

Problem 31 of 86 in the Shift Registers track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.