Codiode

Debug: Blocking Assignment Race Condition

MediumVerilog / SystemVerilogBuildFree8 solved

A two-stage pipeline delays d by two clock cycles, so q shows the value d had two cycles earlier.

Expected behaviour, reading q just before each rising edge:

Cycle d q
1 1 0
2 0 0
3 0 1
4 0 0

What the simulation shows: q goes high in cycle 2, one cycle early. The pipeline behaves like a single register: the second stage copies the first stage's new value on the same edge.

The design below has one bug. Find it and fix it.

Signal Direction Width Description
clk input 1 Clock, rising edge
d input 1 Data in
q output 1 d delayed by two cycles

Constraints

  • Keep the port list clk, d, q.
  • Don't add pipeline stages or registers.
  • Change at most 2 lines.

Topics

DebugVerilogRTLPipeline

Solve this problem

Write the module in Verilog, SystemVerilog or VHDL. Your submission is compiled and simulated against the problem's testbench. You get the waveform back, not a stored answer.

Free to solve. A Codiode account keeps your progress.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Sequential RTL

Problem 3 of 26 in the Sequential RTL track.

Related problems

Browse all problems · Verilog practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.