Codiode

Debug Combinational: Swapped Logic Gates

EasyLogic CircuitDebug

A majority voter circuit ensures fault tolerance in redundant systems by outputting 1 only when at least two of its three inputs are 1.

Expected behavior:

A B C Y
0 0 0 0
0 0 1 0
0 1 0 0
0 1 1 1
1 0 0 0
1 0 1 1
1 1 0 1
1 1 1 1

Simulation shows Y = 0 for input A=1, B=1, C=0 and Y = 1 for input A=0, B=0, C=0. The outputs for these test cases are incorrect. Inspect the circuit and correct the fault.

Constraints

  • Replace only the single faulty component.
  • Do not add new gates or alter the fundamental wiring architecture of the circuit.

Topics

logic-gatescombinational-logicdebuggingfault-testing

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Fault Testing and Verification

Problem 11 of 29 in the Fault Testing and Verification track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.