Codiode

Single Fault Activation

EasyLogic CircuitAnalyzeFree1 solved

Manufacturing defects in silicon are modeled as nodes permanently tied to ground or power, known as stuck-at faults. Finding these defects requires generating specific input vectors that force the faulty node to behave differently than a healthy node.

A three-input combinational circuit has inputs A, B, and C. Inputs A and B feed into an AND gate to produce internal node W. Node W and input C feed into an OR gate to produce the final output Y.

A fabrication defect causes node W to be Stuck-at-0 (SA0). Determine the specific input vector required to activate this fault at the internal node.

Constraints

  • Fault activation strictly requires driving the target node to the opposite logic level of the fault.
  • Propagation of the fault to the primary output Y is a separate step and is not evaluated for pure activation.

Topics

combinationalfault-testingstuck-at

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

Free to solve. A Codiode account keeps your progress.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Fault Testing and Verification

Problem 1 of 29 in the Fault Testing and Verification track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.