Codiode

Debug 4:1 Multiplexer

MediumLogic CircuitDebug

A 4:1 multiplexer routes one of four input signals to a single output based on a 2-bit select value.

Expected behavior:

S1 S0 Y
0 0 I0
0 1 I1
1 0 I2
1 1 I3

Simulation shows Y = 1 for inputs I3=0, I2=1, I1=0, I0=0 when S1=0, S0=1. The output should be 0 because I1 is 0. Inspect the circuit and correct the fault.

Constraints

  • Do not add new logic gates to the design
  • Fix the existing wiring to achieve the expected behavior

Topics

combinationalmultiplexerrouting

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Combinational Building Blocks

Problem 20 of 42 in the Combinational Building Blocks track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.