Traffic Light Controller with Timer
If each second of a light's phase were its own state, the FSM would have hundreds of states. Keep the FSM to the light colours and let a separate timer count the seconds.
The module coordinates a standard three-color traffic light cycle: Red, Green, Yellow, and back to Red. It interfaces with an external timer module to control the duration of each color. When the FSM enters a new state, it asserts a start signal for exactly one clock cycle. It then holds its current color output until the external timer asserts its done signal, at which point the FSM advances to the next color and issues a new start signal.
The circuit is driven by a positive-edge triggered clock and an asynchronous active-low reset. Upon reset, the FSM must enter the RED state and immediately assert the timer start signal to kick off the initial countdown. If the timer done signal is asserted on the exact cycle the reset is released, it must be ignored until the next clock cycle.
Worked Trace
Cycle 1: rst_n=0 → state=RED, light_state=00, timer_start=1
Cycle 2: rst_n=1, timer_done=0 → state=RED, light_state=00, timer_start=0
Cycle 3: timer_done=1 → state=GREEN, light_state=01, timer_start=1
Cycle 4: timer_done=0 → state=GREEN, light_state=01, timer_start=0
Cycle 5: timer_done=1 → state=YELLOW, light_state=10, timer_start=1
Diagram
Port Table
| Signal | Direction | Width | Description |
|---|---|---|---|
clk |
input | 1 | Positive-edge triggered clock |
rst_n |
input | 1 | Asynchronous active-low reset; resets state to RED and asserts timer_start |
timer_done |
input | 1 | Asserted by external timer when the wait period completes |
timer_start |
output | 1 | Asserts for exactly one cycle when entering a new state or upon reset |
light_state |
output | 2 | Current traffic light color (00=RED, 01=GREEN, 10=YELLOW) |
Constraints
- Clock is positive-edge triggered.
- Reset is asynchronous and active-low.
- Output
light_statemust be2'b00(RED) on reset. - Output
timer_startmust be1'b1when reset is active, and for exactly one cycle after entering any new state. - State transitions must occur exactly when
timer_doneis1'b1. - If
timer_doneis asserted during reset, it must be ignored until reset is released. - State encoding must strictly follow: RED =
2'b00, GREEN =2'b01, YELLOW =2'b10.
Topics
Solve this problem
Write the module in Verilog, SystemVerilog or VHDL. Your submission is compiled and simulated against the problem's testbench. You get the waveform back, not a stored answer.
This problem is part of Codiode Pro. The statement above is free to read.
The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.
Part of FSM Coding
Problem 9 of 15 in the FSM Coding track.
Related problems
Browse all problems · Verilog practice problems · Learning tracks