Codiode

Valid Data Propagation

EasyVerilog / SystemVerilogBuildFree7 solved

Data that takes two cycles to compute needs its valid flag delayed by the same two cycles. Otherwise downstream logic takes garbage for a result.

The module delays an 8-bit data bus and its associated valid signal by exactly two clock cycles. The output data and output valid signal must unconditionally reflect the inputs from two clock cycles prior.

The circuit operates on the positive edge of clk. An asynchronous, active-low reset rst_n clears all pipeline stages, forcing both the data and valid outputs to zero.

Cycle 1: rst_n=0 → valid_out=0, data_out=8'h00
Cycle 2: rst_n=1, valid_in=1, data_in=8'hAA → valid_out=0, data_out=8'h00
Cycle 3: valid_in=0, data_in=8'hBB → valid_out=0, data_out=8'h00
Cycle 4: valid_in=1, data_in=8'hCC → valid_out=1, data_out=8'hAA
Cycle 5: valid_in=0, data_in=8'h00 → valid_out=0, data_out=8'hBB
Cycle 6: valid_in=0, data_in=8'h00 → valid_out=1, data_out=8'hCC

Signal Direction Width Description
clk input 1 Positive-edge triggered clock
rst_n input 1 Asynchronous active-low reset; all outputs and internal registers go to 0 when asserted
valid_in input 1 Input valid strobe
data_in input 8 Input data bus
valid_out output 1 Output valid strobe; reflects valid_in from two cycles prior
data_out output 8 Output data bus; reflects data_in from two cycles prior

Constraints

  • The circuit must trigger on the positive edge of clk.
  • The reset must be asynchronous and active-low.
  • All internal pipeline registers and outputs must reset to 0.
  • Both data_in and valid_in must be pipelined unconditionally; the data pipeline must shift every cycle regardless of the state of valid_in.

Topics

Shift RegisterDatapathPipelining

Solve this problem

Write the module in Verilog, SystemVerilog or VHDL. Your submission is compiled and simulated against the problem's testbench. You get the waveform back, not a stored answer.

Free to solve. A Codiode account keeps your progress.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Pipelining

Problem 2 of 20 in the Pipelining track.

Related problems

Browse all problems · Verilog practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.