Codiode

8-Bit Synchronous Counter with Carry-Lookahead

HardLogic CircuitBuild

High-frequency processors and network routers require timers that do not bottleneck the system clock. A standard synchronous counter uses a ripple-carry AND chain that creates an escalating critical path delay. Carry-lookahead principles reduce this critical path by generating toggle terms in parallel.

Implement an 8-bit synchronous up-counter using two-level AND-OR logic for all carry and toggle terms. The counter state Q increments by 1 on every clock cycle when en is high. When rst is high, the counter synchronously resets to 0.

rst en Q_next
1 0 0
1 1 0
0 0 Q
0 1 Q + 1

Constraints

  • Limit the logic path between any flip-flop output Q and any toggle input T to a maximum of two gate levels.
  • Do not use a serial ripple-carry AND chain between stages.
  • Generate shared partial product terms to drive the upper bits.
  • Use only basic logic gates and standard flip-flops.

Topics

CountersCarry-LookaheadHigh-Speed Logic

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 24 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.