Codiode

SR NOR Latch: Basic Construction

EasyLogic CircuitBuildFree7 solved

Static memory cells and basic state-holding elements rely on feedback loops to retain data. The fundamental building block of these memory structures is a bistable multivibrator that stores a single bit of state and responds to explicit set and reset commands.

The circuit receives a Set (S) and Reset (R) signal and produces a state output (Q) and its complement (Qn). When both inputs are low, the circuit must hold its previous state. Driving both inputs high forces both outputs low.

S R Q (next) Qn (next)
0 0 Latch Latch
0 1 0 1
1 0 1 0
1 1 0 0

Constraints

  • Use exactly two NOR gates.
  • Implement cross-coupled feedback directly from the outputs to the inputs.
  • Do not use any sequential primitive blocks like D-flip-flops or predefined latches.

Topics

MemoryLatchesSequential Logic

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

Free to solve. A Codiode account keeps your progress.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Latches and Flip-Flops

Problem 1 of 126 in the Latches and Flip-Flops track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.