SR NOR Latch: Normal Operation Waveform Trace
An active-high SR NOR latch drives Q HIGH when S is 1, drives Q LOW when R is 1, and holds its previous state when both inputs are 0. Four signals are shown: S (Set input), R (Reset input), Q (primary output, initially 0) and Q_bar (complementary output, initially 1). Trace Q and Q_bar across all 10 time steps.
Constraints
SandRare never HIGH at the same time during this capture.- The outputs
QandQ_barmust act as logical complements under normal operating conditions.
Topics
Solve this problem
Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.
Free to solve. A Codiode account keeps your progress.
The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.
Part of Latches and Flip-Flops
Problem 2 of 126 in the Latches and Flip-Flops track.
Related problems
Browse all problems · Digital logic design practice problems · Learning tracks