Codiode

BCD Counter: Carry Out for Cascade

MediumLogic CircuitBuild

Digital clocks, multimeters, and frequency counters rely on cascaded decimal stages to represent human-readable numbers. The carry-out signal of a Binary-Coded Decimal (BCD) counter acts as the enable for the next highest digit in the cascade.

A standard 4-bit binary counter overflows at 15, but a BCD counter wraps around after 9. The combinational carry-out logic must assert CO HIGH only when the counter state Q[3:0] reaches 9 (binary 1001). Assume the input state is a valid BCD digit (0 through 9). States 10 through 15 will never occur.

Q3 Q2 Q1 Q0 CO
0 0 0 0 0
0 0 0 1 0
0 0 1 0 0
0 0 1 1 0
0 1 0 0 0
0 1 0 1 0
0 1 1 0 0
0 1 1 1 0
1 0 0 0 0
1 0 0 1 1

Constraints

  • Use only combinational logic.
  • Derive the output CO directly from the state bits Q3, Q2, Q1, and Q0.

Topics

BCDCombinational LogicCascadeCounters

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 63 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.