Codiode

BCD Counter: Power-On Invalid State Recovery Trace

HardLogic CircuitTiming Diagram

A positive-edge-triggered BCD counter powers on in an invalid state, requiring the application of its minimized next-state logic to trace its recovery to a valid counting sequence.

Five signals are shown: CLK (clock, period 2), and four state outputs Q3, Q2, Q1, Q0 (initially 1, 1, 0, 1). The next-state logic equations for the flip-flops are:
D3 = (Q3 & ~Q0) | (Q2 & Q0 & (Q1 | Q3))
D2 = Q2 ^ (Q1 & Q0)
D1 = (Q1 ^ Q0) & (~Q3 | Q2)
D0 = ~Q0

Trace outputs Q3, Q2, Q1, and Q0 across all 16 time steps.

Constraints

  • Outputs update only on the LOW-to-HIGH transition of CLK.
  • Standard bitwise operators are used: ~ (NOT), & (AND), | (OR), ^ (XOR).

Topics

timingsequential-logiccountersstate-machines

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 71 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.