Codiode

Ring Counter

EasyLogic CircuitBuild

State machines and multi-phase clock generators often require a single active pulse that circulates continuously. The ring counter provides this precise timing sequence by operating a shift register in a closed feedback loop.

Construct a 4-bit ring counter using D flip-flops. When init is 1, the circuit must synchronously load the initial state 1000 on the rising edge of clk. When init is 0, the register shifts its contents on every rising clock edge. The shift path must follow Q3 to Q0, Q0 to Q1, Q1 to Q2, and Q2 to Q3.

init clk Q3 Q2 Q1 Q0
1 ↑ 1 0 0 0
0 ↑ 0 0 0 1
0 ↑ 0 0 1 0
0 ↑ 0 1 0 0
0 ↑ 1 0 0 0

Constraints

  • Use exactly four D flip-flops.
  • Implement the synchronous initialization logic using multiplexers on the flip-flop data inputs.
  • Do not use pre-packaged counter or shift register modules.

Topics

State MachineCountersShift Registers

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 96 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.