Codiode

Synchronous Counter with Enable

MediumLogic CircuitTiming Diagram

A 2-bit synchronous up-counter increments its value on the rising edge of the clock only when the enable signal is high.

Four signals are shown: CLK (clock, period 2), EN (input), Q0 (output LSB), and Q1 (output MSB). Both output bits are initially 0.

Trace Q0 and Q1 across all 14 time steps.

Constraints

  • The counter only updates its state on the LOW-to-HIGH transition of CLK.
  • When EN is LOW during a rising clock edge, the counter holds its current value.

Topics

Sequential LogicCountersEnable Gating

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 21 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.