Codiode

Up/Down Counter: Direction Change Mid-Count Waveform

EasyLogic CircuitTiming Diagram

A 3-bit synchronous up/down counter updates its internal state on every positive clock edge, incrementing by 1 when UP_DN is HIGH and decrementing by 1 when UP_DN is LOW. Five signals are shown: CLK (clock, period 2), UP_DN (direction input), and Q2, Q1, Q0 (counter outputs). The initial state of the counter is 5 (Q2=1, Q1=0, Q0=1). Trace Q2, Q1, and Q0 across all 12 time steps.

Constraints

  • Output changes only occur on the LOW-to-HIGH transitions of CLK.
  • The direction input UP_DN is evaluated exactly at the rising edge of the clock.
  • Changes to UP_DN mid-cycle do not affect the output until the next rising clock edge.

Topics

Sequential LogicWaveformCounters

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 47 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.