Codiode

Missing Else in Combinational Logic

EasyLogic CircuitDebug

An address decoder asserts an enable signal for valid memory addresses and deasserts it for invalid addresses.

Expected behavior:

A1 A0 EN
0 0 1
0 1 1
1 0 1
1 1 0

Simulation shows EN = 1 for input A1=1, A0=1 when transitioning from a previous valid address. The enable output fails to deassert for the invalid address state. Inspect the circuit and correct the fault.

Constraints

  • The circuit must be purely combinational.
  • Output EN must be actively driven to a defined logic level for all input combinations.

Topics

combinationallatchdebugdecoder

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Fault Testing and Verification

Problem 28 of 29 in the Fault Testing and Verification track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.