Codiode

Synchronous Counter: Gate Count vs. Ripple Counter

MediumLogic CircuitAnalyze

High-speed digital systems require counters that update all bits simultaneously to avoid transient decoding errors. A 4-bit synchronous up-counter is built using T flip-flops Q0 through Q3. The toggle input T0 is tied high. The subsequent toggle inputs T1, T2, and T3, along with the terminal count output TC, are driven by a parallel carry chain using standard AND gates.

A parallel 4-bit ripple counter is built using the exact same T flip-flops. Compare the combinational logic overhead of the synchronous design against the ripple design. Determine the total gate input count for the synchronous carry chain and evaluate the area versus speed tradeoffs.

Constraints

  • Assume standard multi-input AND gates are available for the synchronous carry chain.
  • The ripple counter uses exactly zero external combinational logic gates.
  • The terminal count TC must assert when all bits Q0 through Q3 are high.

Topics

counterssynchronousripplearea-speed-tradeoffgate-count

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 25 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.