Codiode

Up/Down Counter: Enable Direction Latch

HardLogic CircuitTiming Diagram

A positive-edge-triggered 2-bit counter increments when DIR is 1 and decrements when DIR is 0, but only updates its state when EN is 1.

Five signals are shown: CLK (clock, period 2), EN (active-high enable), DIR (direction control), and Q1 and Q0 (the 2-bit output state, both initially 0).

Trace Q1 and Q0 across all 12 time steps.

Constraints

  • The counter state only updates on the LOW-to-HIGH transition of CLK.
  • Changes to DIR while EN is 0 do not immediately affect the output but dictate the direction of the next active count.

Topics

sequential-logictiming-diagramcountersstate-elements

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 59 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.