Codiode

4-Bit Synchronous Counter with Terminal Count

MediumLogic CircuitBuild

Cascading multiple counters to form larger timers or dividers requires a clean synchronization signal. The terminal count output provides this cascade interface by signaling exactly when the counter reaches its maximum value.

Implement a 4-bit synchronous up-counter with a synchronous reset. The counter increments its 4-bit output Q on every rising edge of the clock. When rst is 1, Q resets to 0 on the next clock edge. The terminal count output TC is a combinational signal that goes high only when all bits of Q are 1.

Q[3] Q[2] Q[1] Q[0] TC
0 1 1 1 0
1 0 1 1 0
1 1 0 1 0
1 1 1 0 0
1 1 1 1 1

Constraints

  • TC must be driven by combinational logic directly from the Q outputs.
  • Do not use asynchronous resets.
  • TC must strictly be 0 for states 7, 11, and 13.

Topics

CounterCascadeSynchronousTerminal Count

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Counters

Problem 15 of 139 in the Counters track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.