Codiode

Synchronous Reset Priority

MediumLogic CircuitTiming Diagram

A positive-edge-triggered D flip-flop with a synchronous active-low reset evaluates its inputs at every LOW-to-HIGH transition of CLK. Four signals are shown: CLK (clock, period 2), RST_n (synchronous active-low reset), D (data input), and Q (output, initially 0). Trace Q across all 12 time steps.

Constraints

  • The output Q only changes state in response to a LOW-to-HIGH transition on CLK.
  • Synchronous reset RST_n has strict priority over data D.
  • If RST_n is 0 at the rising clock edge, Q is forced to 0 regardless of the value of D.

Topics

Latches and Flip-FlopsSynchronous ResetLogic Analyzer

Solve this problem

Place the gates, wire them up and watch the signals settle. Every submission runs on the same simulation engine that grades it.

This problem is part of Codiode Pro. The statement above is free to read.

The circuit builder and code editor need a desktop screen. On a phone, read the problem here and open it on a laptop to solve.

Part of Latches and Flip-Flops

Problem 78 of 126 in the Latches and Flip-Flops track.

Related problems

Browse all problems · Digital logic design practice problems · Learning tracks

Solve this on a laptopSend yourself the link and continue there.