Practice
RTL and digital design interview questions
Lists of interview questions tell you what gets asked. These are the questions themselves, with a grader behind them: a round robin arbiter, a divide by three clock with a 50 percent duty cycle, a glitch free clock multiplexer, FIFO sizing.
39 problems9 free to solve5 easy, 19 medium, 15 hard
They come with no hints and no starter design, the way an interviewer asks them. Some are Verilog and some are circuits or analysis, because interviews ask both.
What these problems cover
- Arbiters, clock dividers and clock multiplexers
- FIFO design and back of envelope sizing
- Synchronizers and reset handling
- Setup, hold and maximum frequency reasoning
- Spotting implied state, races and missing defaults
Free to start
Solve these with a free account. Every other statement on this page is free to read.
Problems by track
Interview Circuit10
Interview Circuit29
- The Hidden LFSR
- The Reconvergent Glitch
- Divide by Three with 50 Percent Duty Cycle
- Strict Round Robin Arbiter
- Dual Edge Pulse Generator
- The 75 Percent Adder
- The Backwards Synchronizer
- Setup Time Under Skew
- Shift Register Hold Violation
- The Unsafe Ring Counter
- Maximum Frequency of a 16 Bit RCA
- Memory Sizing for an 8 Bit Multiplier
How your answer is checked
RTL questions run against a testbench in simulation, with the waveform and synthesis view. Circuit questions run on the circuit simulator, and analysis questions are checked against their answer key.
Questions
- Which roles are these for?
- RTL design, ASIC and FPGA design, and design verification interviews, where writing and reasoning about RTL is the core of the loop.
- What should I solve before these?
- The sequential RTL, FSM coding and clock domain crossing tracks cover the basics these questions assume.